O2/3 ‘Tango’

This forum is for the discussion of the locomotives, motive power, and rolling stock of the LNER and its constituent companies.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard

Post Reply
Michael3434
NER Y7 0-4-0T
Posts: 3
Joined: Wed Feb 05, 2020 11:23 pm

O2/3 ‘Tango’

Post by Michael3434 »

Why is the O2/3 referred to as a Tango? I know the O4 is referred to as Robinson after the CME who designed it but from what I can see the O2 was designed by Gresley before grouping.
Cheers
jwealleans
LNER A4 4-6-2 'Streak'
Posts: 4303
Joined: Wed Oct 25, 2006 8:46 am

Re: O2/3 ‘Tango’

Post by jwealleans »

I hadn't heard of the O4 being called a 'Robinson'. 'Mexborough Pacific' was the only nickname I'd heard of for them.

I believe 'Tango' came from the motion of the cab when travelling. K2s or K3s were called 'Jazzers' for a similar reason, IIRC?
60129 GUY MANNERING
GER D14 4-4-0 'Claud Hamilton'
Posts: 325
Joined: Mon Apr 12, 2010 6:09 pm
Location: Grantham

Re: O2/3 ‘Tango’

Post by 60129 GUY MANNERING »

It was the K3's that were referred to as "Jazzers"
jwealleans
LNER A4 4-6-2 'Streak'
Posts: 4303
Joined: Wed Oct 25, 2006 8:46 am

Re: O2/3 ‘Tango’

Post by jwealleans »

You're right. K2s were 'Ragtimers'?
Michael3434
NER Y7 0-4-0T
Posts: 3
Joined: Wed Feb 05, 2020 11:23 pm

Re: O2/3 ‘Tango’

Post by Michael3434 »

Thanks for the help. I didn’t realise that about the K3.
My first OO scale loco I bought was Bachmann’s O4 Robinson. Beautiful loco and still runs really well.
Attachments
0F51C21F-C61D-4ADD-B59B-651889035374.jpeg
JASd17
LNER A3 4-6-2
Posts: 1328
Joined: Thu Nov 25, 2010 11:21 pm

Re: O2/3 ‘Tango’

Post by JASd17 »

J
Last edited by JASd17 on Sat Feb 15, 2020 12:20 am, edited 1 time in total.
JASd17
LNER A3 4-6-2
Posts: 1328
Joined: Thu Nov 25, 2010 11:21 pm

Re: O2/3 ‘Tango’

Post by JASd17 »

post removed, not relevant enough.

J
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6658
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: O2/3 ‘Tango’

Post by Atlantic 3279 »

I don't think the O4s were ever referred to as "Robinsons". That's just Bachmann's box labelling. Robinson's team designed them, but they designed a lot of other locos too.
On the GCR where they originated they were known ironically as "Tinies", and the great subsequent surplus of those built for the Railway Operating Division of the War Ministry during the Great War were widely known as "RODs".
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Hatfield Shed
LNER A4 4-6-2 'Streak'
Posts: 1728
Joined: Fri Dec 23, 2011 3:34 pm

Re: O2/3 ‘Tango’

Post by Hatfield Shed »

The GNR, and subsequently the GN section, was quite richly endowed with clearly unofficial names for loco classes. The Ivatt 0-8-0 rejoiced in 'Long Tom' while the small atlantics were 'Klondykes' for the gold rush at the time of their introduction. The 0-6-0ST were for some reason 'Humpies' while the 0-6-2T was more logically a Met tank, and the Ivatt/Gresley 0-6-0 LNER J6 was a Knick-Knack, and once heard coasting you knew why. Gresley's 0-6-0T was a 'Submarine' and his enlargement of the 0-6-2T logically enough a 'Big Met': and thus the soubriquet of 'Swedey Met' was evolved after the grouping for the N7s allocated to Hatfield. Given the parochiality of the railway system, it should be added that these were what I knew from the KX inner suburban area at the end of steam, and may not be universally applicable.
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6658
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: O2/3 ‘Tango’

Post by Atlantic 3279 »

Or Klondike :D
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
User avatar
manna
LNER A4 4-6-2 'Streak'
Posts: 3861
Joined: Sun May 24, 2009 12:56 am
Location: All over Australia

Re: O2/3 ‘Tango’

Post by manna »

G'day Gents

Tango, Ragtimer, Jazzers, all named after popular dances of the time.

manna
EDGWARE GN, Steam in the Suburbs.
harry lamb
NER Y7 0-4-0T
Posts: 5
Joined: Wed Jun 12, 2019 11:40 pm

Re: O2/3 ‘Tango’

Post by harry lamb »

An Immingham driver I knew very well and spent most of his time on steam would always refer to a either an 'O4' or 'O2' as a 'straight 8'. The trouble is I cannot remember which one it was! When he talked about a passenger turn he never used the term 'carriage or coach', it was always 'cars'.
Hatfield Shed
LNER A4 4-6-2 'Streak'
Posts: 1728
Joined: Fri Dec 23, 2011 3:34 pm

Re: O2/3 ‘Tango’

Post by Hatfield Shed »

harry lamb wrote: Sat Apr 04, 2020 12:55 pm An Immingham driver I knew very well and spent most of his time on steam would always refer to a either an 'O4' or 'O2' as a 'straight 8'. The trouble is I cannot remember which one it was! When he talked about a passenger turn he never used the term 'carriage or coach', it was always 'cars'.
Good illustration of variations in local use, before the age of ubiquitous comunication and travel.

Let's make a guess that the O4 might be the 'straight 8': the plane of the footplate the full length of the loco frame a very distinctive feature. (Whereas the O2 was very curvy in Doncaster style in this department.) 50% chance of landing on the correct choice...
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6658
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: O2/3 ‘Tango’

Post by Atlantic 3279 »

My wife's uncle spent a short time at Immingham, cleaning / firing after WW2, before joining one of the household cavalry regiments. I remember him referring to "straight eights".
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Post Reply