The end for Miles Beevor
Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard
The end for Miles Beevor
An old photo I discovered when clearing out of Miles Beevor with Duke of Gloucester surprisingly at Crewe Works. The Duke fared better!
- 60800
- LNER A4 4-6-2 'Streak'
- Posts: 2316
- Joined: Sun Apr 17, 2011 5:41 pm
- Location: N-Lincolnshire
- Contact:
Re: The end for Miles Beevor
At least the driving wheels ended up in a better place
36C - Based out of 50H and 36F
-
- LNER A4 4-6-2 'Streak'
- Posts: 1558
- Joined: Wed Feb 27, 2008 5:17 am
- Location: Alberta - ex. Stevenage
Re: The end for Miles Beevor
Another 'orrible photo . Steady on, deepol, we're supposed to be in a cheery mood cruising into Christmas an' all.
-
- LNER J39 0-6-0
- Posts: 160
- Joined: Sun Feb 17, 2008 6:16 pm
- Location: Ottawa
Re: The end for Miles Beevor
At least the driving wheels ended up in a better place
Excuse my ignorance Blackout, but where did the driving wheels end up? Was it under "Sir Nigel Gresley" by any chance?
If yes, then it solves a minor mystery for me. When I was researching 60010 at the Exporail archives, I scribbled this note down, which when I came to read it months later I didn't quiet understand..
I wrote....." J P Heald(?)-SNG-Miles B-Parts- superheated elements, coupled wheels, balance weights fractured"......
Cheers,
Owd Sweedy.
Excuse my ignorance Blackout, but where did the driving wheels end up? Was it under "Sir Nigel Gresley" by any chance?
If yes, then it solves a minor mystery for me. When I was researching 60010 at the Exporail archives, I scribbled this note down, which when I came to read it months later I didn't quiet understand..
I wrote....." J P Heald(?)-SNG-Miles B-Parts- superheated elements, coupled wheels, balance weights fractured"......
Cheers,
Owd Sweedy.
-
- LNER A4 4-6-2 'Streak'
- Posts: 4303
- Joined: Wed Oct 25, 2006 8:46 am
Re: The end for Miles Beevor
Much of the motion on SNG is stamped '26' or '60026', but I don't think I ever noticed such marking on the drivers. Not that it would usually be terribly visible.
Re: The end for Miles Beevor
I have seen this shot before, i believe that Crewe were overhauling 60007(?) & used Miles Beevor as a source of parts.
- 60800
- LNER A4 4-6-2 'Streak'
- Posts: 2316
- Joined: Sun Apr 17, 2011 5:41 pm
- Location: N-Lincolnshire
- Contact:
Re: The end for Miles Beevor
I'm not sure if the full set of six drivers were used, but 60007 definitely got at least three of em.
36C - Based out of 50H and 36F
Re: The end for Miles Beevor
It’s a sad image for me and besides being a success or not, they both ended up on the same scrap line.
Regards
Steve
Regards
Steve
- Blink Bonny
- LNER A4 4-6-2 'Streak'
- Posts: 3946
- Joined: Mon Dec 03, 2007 9:21 pm
- Location: The Midlands
- Contact:
Re: The end for Miles Beevor
Ay up!
Let's look on the bright side. Thanks to a number of folk who don't know the meaning of the word "impossible", we do at least still have the Duke!
71000 sounds like a "40" in the distance - wonderful machine!
Let's look on the bright side. Thanks to a number of folk who don't know the meaning of the word "impossible", we do at least still have the Duke!
71000 sounds like a "40" in the distance - wonderful machine!
If I ain't here, I'm in Bilston, scoffing decent chips at last!!!!
-
- GER D14 4-4-0 'Claud Hamilton'
- Posts: 380
- Joined: Tue Oct 19, 2010 12:45 pm
- Location: Southampton
Re: The end for Miles Beevor
Hi BB
With turbo-charger 'whistle' and a horn that goes 'EyOoo'??
With turbo-charger 'whistle' and a horn that goes 'EyOoo'??
PP
The light at the end of the tunnel is probably a train coming towards you!!
The light at the end of the tunnel is probably a train coming towards you!!
- Blink Bonny
- LNER A4 4-6-2 'Streak'
- Posts: 3946
- Joined: Mon Dec 03, 2007 9:21 pm
- Location: The Midlands
- Contact:
Re: The end for Miles Beevor
Ay up!
Nah - just a deep rumble in the distance like a "40" on full thrape!
Nah - just a deep rumble in the distance like a "40" on full thrape!
If I ain't here, I'm in Bilston, scoffing decent chips at last!!!!
Re: The end for Miles Beevor
The Duke ended up at Barry, 26 did not..... How come?Deepol wrote:An old photo I discovered when clearing out of Miles Beevor with Duke of Gloucester surprisingly at Crewe Works. The Duke fared better!
- 60800
- LNER A4 4-6-2 'Streak'
- Posts: 2316
- Joined: Sun Apr 17, 2011 5:41 pm
- Location: N-Lincolnshire
- Contact:
Re: The end for Miles Beevor
I believe the duke was initially taken to the wrong scrapyard
36C - Based out of 50H and 36F
Re: The end for Miles Beevor
Remember seeing the Duke at Barry back in the mid 70s.
It was minus its cylinders which had been salvaged for the Science Museum I believe.
It was minus its cylinders which had been salvaged for the Science Museum I believe.
- Blink Bonny
- LNER A4 4-6-2 'Streak'
- Posts: 3946
- Joined: Mon Dec 03, 2007 9:21 pm
- Location: The Midlands
- Contact:
Re: The end for Miles Beevor
Ay up!blackout60800 wrote:I believe the duke was initially taken to the wrong scrapyard
Yup, 71000 was sent to Cashmore's who'd already started stripping it prior to cutting when a photoggy, or so I am lead to believe, noticed that the label was for Barry. She was re-delivered to Barry instead, hence her survival.
As to why the streak didn't get there - weight restrictions, loading gauge restrictions, unfitness to travel far, who knows?
If I ain't here, I'm in Bilston, scoffing decent chips at last!!!!