York - Selby old mainline

This forum is for the discussion of railway modelling of the LNER and its constituent companies.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard

Post Reply
User avatar
silver fox
GCR O4 2-8-0 'ROD'
Posts: 535
Joined: Wed Feb 20, 2008 11:51 pm
Location: 50A Clifton originally of 88A
Contact:

York - Selby old mainline

Post by silver fox »

Does anyone know of any books out there that have information on the line, especially the Naburn swing bridge, as I think I can fit in this on my board.
I need the dimentions of the bridge ideally, I think in N I have worked it out to 44cm long that be a total of 219ft, yes I know 43.8cm!

But I need the actual dimmentions of the 2 spans (one bigger than the other, and the box on the top.

I have found 4 pictures on the interweb, and one of 60008 over it in Yeadons and 61832 in York Revisited.
Attachments
naburn swing 1.jpg
I can get the height of the sides from this one
(49.33 KiB) Downloaded 49 times
naburn swing 6.jpg
naburn swing 6.jpg (46.49 KiB) Viewed 4192 times
naburn swing 5.jpg
naburn swing 5.jpg (36.07 KiB) Viewed 4194 times
By Mark t
http://www.youtube.com/yorksteam
(I was here first, with the space!)
wehf100
GCR D11 4-4-0 'Improved Director'
Posts: 486
Joined: Thu Nov 01, 2007 3:42 pm
Location: Cambridgeshire

Post by wehf100 »

well it is still there- so I would use either an OS map, or something clever and digital like flashearth or planningportal.gov.uk

http://www.flashearth.com/?lat=53.91104 ... =0&src=msl

http://www.planningportal.gov.uk/planni ... igest=fst4

is it going to be a working model??!!

Will
User avatar
silver fox
GCR O4 2-8-0 'ROD'
Posts: 535
Joined: Wed Feb 20, 2008 11:51 pm
Location: 50A Clifton originally of 88A
Contact:

Post by silver fox »

I know it's still there, it's just down the road, but short of taking a huge tape measure down there!

Microsoft live search

Don't know about it being a working model, I'd need working boats then really!
By Mark t
http://www.youtube.com/yorksteam
(I was here first, with the space!)
User avatar
silver fox
GCR O4 2-8-0 'ROD'
Posts: 535
Joined: Wed Feb 20, 2008 11:51 pm
Location: 50A Clifton originally of 88A
Contact:

Post by silver fox »

Well been and mearured it (in the rain!) (Got some odd looks!) One passing cyclist asked if I was sizing it up for scrap (Now there's a money making idea!)

For reference it came out at 176ft for the bigger (swinging) bit and 107.4ft for the other half
It is 22.10ft wide
The smaller half is 6.4ft high, and the bigger one aprox 11ft (Taller than me!)
By Mark t
http://www.youtube.com/yorksteam
(I was here first, with the space!)
wehf100
GCR D11 4-4-0 'Improved Director'
Posts: 486
Joined: Thu Nov 01, 2007 3:42 pm
Location: Cambridgeshire

Post by wehf100 »

silver fox wrote:but short of taking a huge tape measure down there...
And there was us thinking you were joking!!

Will
User avatar
silver fox
GCR O4 2-8-0 'ROD'
Posts: 535
Joined: Wed Feb 20, 2008 11:51 pm
Location: 50A Clifton originally of 88A
Contact:

Post by silver fox »

Nope, we have one at work - 165ft!
By Mark t
http://www.youtube.com/yorksteam
(I was here first, with the space!)
Post Reply