2750 (Tom's) Workbench-North Eastern Modelling 1938

This forum is for the discussion of railway modelling of the LNER and its constituent companies.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard

drmditch

Re: York Sheds 'LEAMAN ROAD' MPD

Post by drmditch »

auldreekie wrote: More seriously (but never completely so): what a splendid collection of layouts - I had no idea that civilisation existed in such quantity north of Potters Bar and south of Berwick on Tweed.
auldreekie
Excuse me, I am surprised that you think there is any civilisation south of Potters Bar! But don't tell everybody about our marvellous un-crowded beaches, we don't want everybody up here. (Well, except that we do want nice polite people to come and spend money!)

Very good layouts though. Standards to work towards!
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: York Sheds 'LEAMAN ROAD' MPD

Post by Tom F »

Currently working on the next Gresley A1, using a Flying Fox model as the donor once more. Couple of alterations are required to this one.
I shall be depicting 2571 'SUNSTAR' of Gateshead. She was one of the North British Built A1s. The most visible difference is the reach rod underneath the driver's side running plate is of a slightly different design to that on the Doncaster locomotives. This has been reproduced with the Brassmasters A1/A3 detailing etch.

Secondly North British locomotives had the works plate on the middle splasher, underneath the nameplate where as Doncaster builds had it on the side of the smoke box.

Photos to follow shortly.
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
auldreekie
GER D14 4-4-0 'Claud Hamilton'
Posts: 330
Joined: Thu Nov 01, 2012 1:42 pm

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by auldreekie »

Ah: nice polite visitors with money to spend. That warns me off , then....

auldreekie
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by Tom F »

Here is how things look so far gents.

New reach rod is in place which I will spray with Satin Black. Nameplates and works plate fixed firmly in place now. Ready now to renumber the bufferbeam and cabsides.

Image
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
mick b
LNER A4 4-6-2 'Streak'
Posts: 3775
Joined: Tue May 30, 2006 4:43 pm

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by mick b »

Why ? black
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by Tom F »

mick b wrote:Why ? black
I presumed it would be..... was it apple green...or bare metal?
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
mick b
LNER A4 4-6-2 'Streak'
Posts: 3775
Joined: Tue May 30, 2006 4:43 pm

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by mick b »

Metal never seen one painted. The Hornby one is their idea of weathering !!
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by Tom F »

mick b wrote:Metal never seen one painted. The Hornby one is their idea of weathering !!
Ah, I did wonder about Hornby's colour.
Cheers Mick, I will leave as is!
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
User avatar
ArthurK
GNSR D40 4-4-0
Posts: 241
Joined: Sat May 08, 2010 4:23 pm
Location: Lancashire

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by ArthurK »

Tom

Whatever you do to it it will look a lot nicer than this.

Sunstar awaiting its fate at Blaydon.
Book 6 3_3.JPG
ArthurK
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by Tom F »

Next 1938 period loco is ready for the layout.

2571 'SUNSTAR' of Gateshead. Similar treatment as Galtee More, but tried to do some different variations.
Image

Image

This view shows the new reach rod to depict a North British locomotive, plus the removal of Doncaster works plate
on the smoke box as the donor loco was a Doncaster build.
Image

This photo is purely to compare with the link below from flickr of a pre war photo of the real loco at York,
which I used as the basis for my weathering.
Image

2751 at York pre war
http://flic.kr/p/byrv53
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
User avatar
60800
LNER A4 4-6-2 'Streak'
Posts: 2316
Joined: Sun Apr 17, 2011 5:41 pm
Location: N-Lincolnshire
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by 60800 »

Top notch as always Tom :D I'm expecting ex-works (ish ;)) Papyrus with FS headboard next :mrgreen:
36C - Based out of 50H and 36F
User avatar
will5210
GNSR D40 4-4-0
Posts: 219
Joined: Thu Feb 19, 2009 1:16 pm
Location: Nr Blackpool

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by will5210 »

Beautiful!!
Will

My LNER 1930s West Highland Workbench
viewtopic.php?f=3&t=9293

My Blog
http://westhighlandmodelling.wordpress.com/
User avatar
All thumbs
H&BR Q10 0-8-0
Posts: 184
Joined: Tue Sep 06, 2011 1:44 am

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by All thumbs »

Brilliant!
2750 wrote:...This view shows the new reach rod to depict a North British locomotive, plus the removal of Doncaster works plate on the smoke box as the donor loco was a Doncaster build...
Did the North British plates go in the cab?
Be gentle! Returning to the hobby after more than 20 years away...
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by Tom F »

All thumbs wrote:Brilliant!
2750 wrote:...This view shows the new reach rod to depict a North British locomotive, plus the removal of Doncaster works plate on the smoke box as the donor loco was a Doncaster build...
Did the North British plates go in the cab?
They were attached to the centre splasher, which I've done. :)
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938/1950

Post by Tom F »

Full sun has now emerged, so I decided to take some more taking full advantage of the morning sunlight.

Image

Image

@All Thumbs
here you can see the worksplate clearly under the nameplate, plus the North British Reach Rod.
Image

I wanted to capture a couple of shots where the light hits the boiler to give off that sheen.
Image

Image

Thanks for all the feedback guys, much appreciated. :)
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
Post Reply