Atlantic's works: Portable layout - Scenic details next

This forum is for the discussion of railway modelling of the LNER and its constituent companies.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard

S.A.C. Martin

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by S.A.C. Martin »

Very much looking the part Graeme. I think the decision to streamline was a very smart one - it does give this class a very epic presence!

Out of curiosity - how does it match for length against a W1 and an A4? I can imagine it's the longest of the three, but the way in which the other two might be viewed could be altered! :)
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6658
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by Atlantic 3279 »

I'm glad you reminded me about a possible "three streaks compared" picture, as I'd had that thought at one stage too. I'll try to organise it, just for the novelty of seeing a Pacific made to look like Baby Bear.
Last edited by Atlantic 3279 on Thu Jun 17, 2010 8:02 pm, edited 1 time in total.
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
S.A.C. Martin

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by S.A.C. Martin »

Atlantic 3279 wrote:I'm glad you reminded me about a possible "three streaks compared" picture, as I'd had that thouight at one stage too. I'll try to organise it, just for the novelty of seeing a Pacific made to look like Baby Bear.
Thanks Graeme :)

It must be said - placing my W1 alongside a Hornby A4 - the A4 suddenly looks a bit stubby by comparison, not long enough by half! :shock: :lol:
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6658
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by Atlantic 3279 »

.. ... actress .... .. ... bishop
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
User avatar
52D
LNER A4 4-6-2 'Streak'
Posts: 3968
Joined: Sun Jun 03, 2007 3:50 pm
Location: Reallocated now between the Lickey and GWR
Contact:

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by 52D »

I hope Simierski can borrow said 4-8-2 for a future episode possibly with eerie music and wavy & smoke effects maybe a title of "Sir Nigels Dream".
Hi interested in the area served by 52D. also researching colliery wagonways from same area.
S.A.C. Martin

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by S.A.C. Martin »

52D wrote:I hope Simierski can borrow said 4-8-2 for a future episode possibly with eerie music and wavy & smoke effects maybe a title of "Sir Nigels Dream".
Just to emphasize Graeme - I wouldn't ask! :) That would be inappropriate.

Let's stay on topic chap. Graeme's modeling is superb - I look forward to seeing the mountain finished in due course.
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6658
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by Atlantic 3279 »

You never know, if it's a ticket to fame I might lend you the loco sometime Simon.

I seriously intended to go out cycling for the sake of my fitness this morning, but on finding how gloomy, cool, and windy it was (as usual far windier than predicted by the local BBC weather forecast, they NEVER get it right for North East Lincs) I defaulted to some further comfortable modelling instead. The gloom accounts for thye poor quality of some of these update pictures too!

Firstly, this image got missed out previously when I was upoloading. A better view of the coupling mounting tab, simply soldered across the channel that I formed-up as the rear frame extension. Positioning this just so for the right loco-tender distance, level too, and making it stay put whilst I soldered it was a little trying to say the least.
STA75437 rear from beneath, inc coupling.jpg
Boiler cladding bands are now on. For various reasons I went for 5 thou plastikard strips, but once I was irrevocably committed I discovered just how ridiculously difficult it was to get them to stick firmly, neatly, straight and vertical without messing up the surface finish with the solvent. Far more trouble than I had with the one band on the W1 fireboxes. Regardless of any band-to-surface or paint-to-band adhesion doubts, I'll definitely stick to self adhesive tape in future, probably aluminium tape as it won't stretch on application and then "pucker" after painting as PVC tape can, nor is it too thin with dodgy gum like clear tape.
I've also scribed in a couple of panel lines, and set out intended rivet positions in pencil.
STA75450 bands on, holes drilled, rivet lines set out.jpg
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6658
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by Atlantic 3279 »

Although this isn't the finished appearance, here "by popular demand" are a couple of three-way comparison images of Pacific, Baltic and Mountain 'streaks'.
Churchward's first British Pacific may well have been called The Great Bear, but in these pictures of 'the three bears' the Pacific is certainly Ursa Minor.
STA75449 three bears, tops.jpg
STA75453 three bears, left sides.jpg
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
S.A.C. Martin

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by S.A.C. Martin »

Thank you very much Graeme - my word, I do think the A4 looks rather short there!

Strangely - The W1 looks the most majestic of the three, although the Mountain is a very close second. It's definitely the cab that makes the W1 look very clean and elegant compared to the A4, it makes the whole locomotive look rather balanced at the front and rear.

The Mountain is absolutely epic - there's no other word for it! :)
User avatar
52D
LNER A4 4-6-2 'Streak'
Posts: 3968
Joined: Sun Jun 03, 2007 3:50 pm
Location: Reallocated now between the Lickey and GWR
Contact:

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by 52D »

Atlantic i dont suppose you have a model 9F that you could photograph next to the 4-8-2. I would love to see it in comparison as the 9Fs always seemed to dwarf other locos in my opinion.
Hi interested in the area served by 52D. also researching colliery wagonways from same area.
mr B
LNER V2 2-6-2 'Green Arrow'
Posts: 1083
Joined: Fri Jan 08, 2010 2:58 pm

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by mr B »

What next .. 'East Anglian' or 'City of London' ?

Mr B
davidwest
GER D14 4-4-0 'Claud Hamilton'
Posts: 337
Joined: Tue Sep 08, 2009 12:18 pm
Location: West Midlands

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by davidwest »

You've created a monster!
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6658
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by Atlantic 3279 »

I haven't looked at the feasibilty of a B17/5 from the A4 bodyshell. I suspect that all sorts of dimensions might be wrong, but you never know.
I may dig out my 9F for a further photo session tomorrow, perhaps with the P1 thrown in too. I think this will show that the 9F's imposing size is illusory - after all, its boiler may have been jacked up to the limits of the loading gauge but it was actually a smaller boiler than was carried by the Brits. I believe the smaller boiler was necessary for the sake of ashpan space over the coupled wheels (and hence sustained air supply to the grate) and for reduced weight to ensure adequate route availability.
If this is a monster maybe I could call it Nessie, Exmoor Beast, or Hound of the Baskervilles?
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
User avatar
manna
LNER A4 4-6-2 'Streak'
Posts: 3861
Joined: Sun May 24, 2009 12:56 am
Location: All over Australia

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by manna »

G'day Gents

OOOhhh.............What if!!

Some of the most elegant locos ever produced :shock:
manna
EDGWARE GN, Steam in the Suburbs.
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6658
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: Loco workbench - B2, P1, W1, A3, O2/3, P10, P2 & what now!?

Post by Atlantic 3279 »

Here's a possible nameplate that ought to please Mistahjim:

Indefatigable Nameplate artwork.jpg
Indefatigable Nameplate artwork.jpg (6.76 KiB) Viewed 4912 times
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Post Reply