Micks 4mm LNER Models
Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard
- Atlantic 3279
- LNER A4 4-6-2 'Streak'
- Posts: 6658
- Joined: Fri Jun 26, 2009 9:51 am
- Location: 2850, 245
Re: Micks 4mm LNER Models
I was away yesterday so missed this. Nice to see the end result Mick, and I agree that the custom-rolled rigid / stable roof eliminates a number of potential snags.
Most subjects, models and techniques covered in this thread are now listed in various categories on page1
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Re: Micks 4mm LNER Models
Thanks Graeme and to the others for their comments as well.
I will use Brass for all future similar builds, very easy to make up, cheap to buy via ebay as well.
I will use Brass for all future similar builds, very easy to make up, cheap to buy via ebay as well.
-
- LNER A4 4-6-2 'Streak'
- Posts: 1728
- Joined: Fri Dec 23, 2011 3:34 pm
Re: Micks 4mm LNER Models
The 'birdcage' feature really stands out. One of those features that looks so well when executed neatly and all square as here.
OK, questions.
So how did the guard use it? Never having been inside a vehicle fitted with this device my imagination tends to some wooden steps on the carriage side, a grab rail (or two) to the side of the steps, as access to a raised platform. Or could it have been a regular small stairway to a guard's office with desk and chair, brake handle and lock up provision for his journal and any valuables; while tools, detonators, spare coupling, and the like could be in a cupboard beneath. Wouldn't this somewhat interfere with baggage handling?
And what was it for? Specified locations only to enable a clear sight, or as much as possible while the train was in motion?
OK, questions.
So how did the guard use it? Never having been inside a vehicle fitted with this device my imagination tends to some wooden steps on the carriage side, a grab rail (or two) to the side of the steps, as access to a raised platform. Or could it have been a regular small stairway to a guard's office with desk and chair, brake handle and lock up provision for his journal and any valuables; while tools, detonators, spare coupling, and the like could be in a cupboard beneath. Wouldn't this somewhat interfere with baggage handling?
And what was it for? Specified locations only to enable a clear sight, or as much as possible while the train was in motion?
-
- LNER V2 2-6-2 'Green Arrow'
- Posts: 1101
- Joined: Mon Sep 19, 2011 12:24 am
Re: Micks 4mm LNER Models
So far I have only seen the inside of GNR birdcage breaks,
but in that case there were a set of steps within the carriage.
the guard having a little office with a cupboard for luggage and so on and so on.
I would guess the same applies to NER too.
The poor guard would basically have needed to spend much of his journey there, mind you none
of us know how long a guard spent looking out of the duckets methinks.
I guess it would have been necessary only coming in to stations, or when the driver slowed down dramatically.
Paul
but in that case there were a set of steps within the carriage.
the guard having a little office with a cupboard for luggage and so on and so on.
I would guess the same applies to NER too.
The poor guard would basically have needed to spend much of his journey there, mind you none
of us know how long a guard spent looking out of the duckets methinks.
I guess it would have been necessary only coming in to stations, or when the driver slowed down dramatically.
Paul
-
- LNER A4 4-6-2 'Streak'
- Posts: 1728
- Joined: Fri Dec 23, 2011 3:34 pm
Re: Micks 4mm LNER Models
Thanks Paul. I will have to make the effort to find and inspect preserved examples.
Re: Micks 4mm LNER Models
Two more D&S Builds .
Dia 150 Brake Third Electric Lit.
Dia 26 Comp Brake Gas Lit
Dia 150 Brake Third Electric Lit.
Dia 26 Comp Brake Gas Lit
Re: Micks 4mm LNER Models
Hi Mick
Like those carriages a lot.
Jon
Like those carriages a lot.
Jon
Re: Micks 4mm LNER Models
Thanks, two more to go and I am done . All those windows !!!
Re: Micks 4mm LNER Models
I use Glue n Glaze , I have tried Evo stick and UHU in the past.
- Dave
- LNER A4 4-6-2 'Streak'
- Posts: 1733
- Joined: Sat Nov 13, 2010 9:33 pm
- Location: Centre of the known universe York
Re: Micks 4mm LNER Models
Very nice models Mick, you can't beat proper NER carriages.
- Chas Levin
- GER D14 4-4-0 'Claud Hamilton'
- Posts: 300
- Joined: Fri Apr 10, 2015 11:54 am
- Location: London
-
- LNER A4 4-6-2 'Streak'
- Posts: 1669
- Joined: Tue Mar 09, 2010 9:23 am
- Location: Surrey
Re: Micks 4mm LNER Models
GOOD MORNING ALL from sunny Surrey
Superb, extremely good looking carriages.
Malcolm
Superb, extremely good looking carriages.
Malcolm
Re: Micks 4mm LNER Models
thanks again.
Re: Micks 4mm LNER Models
Mick
What colour (brown) paint have you used on your ex-NER coach models? I seem to recollect that "Track Colour" (Humbrol 173 or whatever) was the colour of choice.
John
What colour (brown) paint have you used on your ex-NER coach models? I seem to recollect that "Track Colour" (Humbrol 173 or whatever) was the colour of choice.
John