G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

This forum is for the discussion of railway modelling of the LNER and its constituent companies.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard

Horsetan
LNER P2 2-8-2
Posts: 972
Joined: Thu Oct 27, 2011 12:46 pm

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by Horsetan »

LNER4479 wrote: Wed Jun 30, 2021 11:21 am B3/2 drawings now complete and sent off to Nick Easton ... who, having had a first look through, is currently lying down in a darkened room :?
That bad already? :shock: :lol:
LNER4479
GER D14 4-4-0 'Claud Hamilton'
Posts: 388
Joined: Wed Sep 18, 2013 9:12 am
Location: 51A

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by LNER4479 »

Quick update.

Revised B3/2 etch design now in hand and to be submitted to etchers with estimated 4-6 week turn round for a further test build of the revised parts.

Meanwhile, the camboxes will be a 3D print. Have seen a first test print which had a dimensional error but otherwise looks OK.
(recreating pre-war Grantham in model form http://www.lner.info/forums/viewtopic.php?f=3&t=9076.
Forthcoming exhibition appearances: Newcastle (Nov 2023); York (Easter 2024); Bristol (May 2024)
LNER4479
GER D14 4-4-0 'Claud Hamilton'
Posts: 388
Joined: Wed Sep 18, 2013 9:12 am
Location: 51A

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by LNER4479 »

Error on 3D Cambox print corrected, here are some pictures today of the trial fit on the test build loco.
DSC01786.JPG
DSC01789.JPG
We're getting there ...
(recreating pre-war Grantham in model form http://www.lner.info/forums/viewtopic.php?f=3&t=9076.
Forthcoming exhibition appearances: Newcastle (Nov 2023); York (Easter 2024); Bristol (May 2024)
User avatar
manna
LNER A4 4-6-2 'Streak'
Posts: 3860
Joined: Sun May 24, 2009 12:56 am
Location: All over Australia

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by manna »

G'Day Gents

Is that a ICBM hiding inside the boiler, Clever. :D

manna

PS, Nice loco.
EDGWARE GN, Steam in the Suburbs.
Horsetan
LNER P2 2-8-2
Posts: 972
Joined: Thu Oct 27, 2011 12:46 pm

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by Horsetan »

Looks encouraging from here.
Human8984
NER Y7 0-4-0T
Posts: 1
Joined: Sat Feb 19, 2022 12:32 pm

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by Human8984 »

How does one aqquire a B3/1 and a B7 Kit?
jwealleans
LNER A4 4-6-2 'Streak'
Posts: 4302
Joined: Wed Oct 25, 2006 8:46 am

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by jwealleans »

You can PM Graham Nicholas (LNER4479) on this forum, or message me and I'll pass it on, or just post what you want here and I'll make sure it gets to him.
61410
NER Y7 0-4-0T
Posts: 1
Joined: Mon Nov 28, 2022 6:37 pm

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by 61410 »

How is the project coming along? Just discovered this and I am quite interested in it.
Horsetan
LNER P2 2-8-2
Posts: 972
Joined: Thu Oct 27, 2011 12:46 pm

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by Horsetan »

61410 wrote: Mon Nov 28, 2022 6:40 pm How is the project coming along? Just discovered this and I am quite interested in it.
It has gone a bit quiet - I guess Graham has more pressing concerns at the moment!
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6657
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by Atlantic 3279 »

The enquiry has been brought to his attention.
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
LNER4479
GER D14 4-4-0 'Claud Hamilton'
Posts: 388
Joined: Wed Sep 18, 2013 9:12 am
Location: 51A

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by LNER4479 »

Now then - don't all fall off your chairs at once but:
DSC03672.JPG
DSC03701.JPG
DSC03700.JPG
DSC03740.JPG
Boiler test etch completed! Call it a(nother) New Year's resolution. Just sent off feedback to the designer (Nick Easton) but basically it's OK so, with two very minor tweaks, I've asked for an initial run of 10 such boilers, which should satisfy current, known orders. Plenty of Graeme's resin boilers in stock so should now be able to offer a choice of either going forward.

Now dropped on to the B3/2 test etch ...
(recreating pre-war Grantham in model form http://www.lner.info/forums/viewtopic.php?f=3&t=9076.
Forthcoming exhibition appearances: Newcastle (Nov 2023); York (Easter 2024); Bristol (May 2024)
User avatar
Chas Levin
GER D14 4-4-0 'Claud Hamilton'
Posts: 300
Joined: Fri Apr 10, 2015 11:54 am
Location: London

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by Chas Levin »

:D
Chas
45609
GCR D11 4-4-0 'Improved Director'
Posts: 426
Joined: Thu Sep 07, 2006 4:51 pm

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by 45609 »

Excellent news. Well done Graham.

Morgan
Horsetan
LNER P2 2-8-2
Posts: 972
Joined: Thu Oct 27, 2011 12:46 pm

Re: G-Train Locomotive Works / Graeme King Joint Venture - GCR/LNER 4-6-0s - B3/1 & B7 available; B3/2 in progress

Post by Horsetan »

LNER4479 wrote: Mon Feb 27, 2023 8:29 pm....Boiler test etch completed! Call it a(nother) New Year's resolution. Just sent off feedback to the designer (Nick Easton) but basically it's OK so, with two very minor tweaks, I've asked for an initial run of 10 such boilers, which should satisfy current, known orders. ...

Now dropped on to the B3/2 test etch ...
Two, please, if you can! - one for the B3/2, and the other to replace the resin one on the earlier B3.

Cheers!
Post Reply