West End Workbench
Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard
Re: West End Workbench
Excellent stuff!
Will
My LNER 1930s West Highland Workbench
viewtopic.php?f=3&t=9293
My Blog
http://westhighlandmodelling.wordpress.com/
My LNER 1930s West Highland Workbench
viewtopic.php?f=3&t=9293
My Blog
http://westhighlandmodelling.wordpress.com/
Re: West End Workbench
Fantastic stuff JW
For info, the BV is a through working from Nottingham to King's Cross.
The Sentinel looks great - a great short-to-mid term solution for a little shunting conundrum...
Look forward to seeing all the stock in action on the layout.
For info, the BV is a through working from Nottingham to King's Cross.
The Sentinel looks great - a great short-to-mid term solution for a little shunting conundrum...
Look forward to seeing all the stock in action on the layout.
(recreating pre-war Grantham in model form http://www.lner.info/forums/viewtopic.php?f=3&t=9076.
Forthcoming exhibition appearances: Newcastle (Nov 2023); York (Easter 2024); Bristol (May 2024)
Forthcoming exhibition appearances: Newcastle (Nov 2023); York (Easter 2024); Bristol (May 2024)
-
- GCR D11 4-4-0 'Improved Director'
- Posts: 413
- Joined: Fri Oct 19, 2012 12:09 am
Re: West End Workbench
When it's not too busy substituting for a failed A4, presumably?jwealleans wrote:Oh, it will, but no more than 20 at a time.
- Atlantic 3279
- LNER A4 4-6-2 'Streak'
- Posts: 6660
- Joined: Fri Jun 26, 2009 9:51 am
- Location: 2850, 245
Re: West End Workbench
An amazing amount of preparation of convincingly weathered money-earning locos and loads of rolling stock. It must be far more than I've done. I'm glad to see the ejector pipes eradicated from the O4/3 conversions, although if I put my pedantic "orifice's" hat on, the rib at the rear of the cab roof should be moved far enough forward to accommodate a rolled tarpaulin behind it, when required.....
BTW, I've finally started putting the other dozen or so App-Frod ironstone hoppers together. I presume we are still endeavouring to make some sense of our available coal wagons this weekend too?
BTW, I've finally started putting the other dozen or so App-Frod ironstone hoppers together. I presume we are still endeavouring to make some sense of our available coal wagons this weekend too?
Most subjects, models and techniques covered in this thread are now listed in various categories on page1
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
- manna
- LNER A4 4-6-2 'Streak'
- Posts: 3862
- Joined: Sun May 24, 2009 12:56 am
- Location: All over Australia
Re: West End Workbench
G'day Gents
700 wagons behind a loco....bet it slips to a stand at 701, Awesome
manna
700 wagons behind a loco....bet it slips to a stand at 701, Awesome
manna
EDGWARE GN, Steam in the Suburbs.
-
- LNER A4 4-6-2 'Streak'
- Posts: 4303
- Joined: Wed Oct 25, 2006 8:46 am
Re: West End Workbench
Moving roof ribs was just a bit too much commitment. I can always add a rolled tarpaulin behind the existing one although I confess I hadn't noticed any on the photos I looked at. I thought they were largely a wartime and after addition?
Reading the latest addition to the passenger sequence, I see we may need to discuss a new requirement for a 6 wheel GN PBV as well.
Coal wagons are definitely on the agenda for the weekend.
Manna - you'll need to speak to Mr King about his P1 if you want 700 wagons pulling at once.
Reading the latest addition to the passenger sequence, I see we may need to discuss a new requirement for a 6 wheel GN PBV as well.
Coal wagons are definitely on the agenda for the weekend.
Manna - you'll need to speak to Mr King about his P1 if you want 700 wagons pulling at once.
-
- LNER A4 4-6-2 'Streak'
- Posts: 1669
- Joined: Tue Mar 09, 2010 9:23 am
- Location: Surrey
Re: West End Workbench
Good morning all
There's a pic of a J81 with a storm sheet attached to the cab weatherboard dated 1923.
The loco was withdrawn in 1924 so tarpaulins dated to at least then.
The was video of an exhibition including Atlantic 3279 and his P1 double heading with a second P1. They must have been able to pull a huge train.
Earlswood nob
There's a pic of a J81 with a storm sheet attached to the cab weatherboard dated 1923.
The loco was withdrawn in 1924 so tarpaulins dated to at least then.
The was video of an exhibition including Atlantic 3279 and his P1 double heading with a second P1. They must have been able to pull a huge train.
Earlswood nob
-
- LNER A4 4-6-2 'Streak'
- Posts: 4303
- Joined: Wed Oct 25, 2006 8:46 am
Re: West End Workbench
In the post-show lull after Grantham, been catching up on the gardening and DIY which has been neglected for some weeks. I also started some work for Scottiedog which has been in the queue. This NER G4 Road Van is a Dan Pinnock kit - I was going to say 'from a recent production', but I've had it almost two years and I don't know how long Scottiedog had it before that. Anyway, it's pretty much all done bar the shouting. Canny kit, as they all are, went together over 3 evenings with few problems.
Last edited by jwealleans on Tue Dec 18, 2018 7:23 am, edited 2 times in total.
-
- LNER A4 4-6-2 'Streak'
- Posts: 4303
- Joined: Wed Oct 25, 2006 8:46 am
Re: West End Workbench
Another one from the same batch (same box, in fact) for Scottiedog. NER Diagram G4 Tranship van. This is basically the same body as the G6 with different doors and bracing. This one put up a bit more of a fight due to the etches having been dropped (I suspect) which had caused the strapping to fold up and crease in places. Not too unhappy with it in the end, though.
Beamish have one of these:
Beamish have one of these:
Last edited by jwealleans on Tue Dec 04, 2018 4:53 pm, edited 2 times in total.
- Dave
- LNER A4 4-6-2 'Streak'
- Posts: 1733
- Joined: Sat Nov 13, 2010 9:33 pm
- Location: Centre of the known universe York
Re: West End Workbench
I have one of those to build, so keep posting the pics, watching with interest.
Scottiedog is very lucky to have you building his kits (he tells me he builds his models ).
Scottiedog is very lucky to have you building his kits (he tells me he builds his models ).
-
- NBR J36 0-6-0
- Posts: 122
- Joined: Sun Oct 12, 2008 8:56 pm
Re: West End Workbench
That Dave's a cheeky so and so - I'm being polite here just in case I get into trouble with the powers that be. I only get JW to do the odd one or two for me when a true craftsman's skills are required! Anyway he's much younger than me and as I am getting on to be an old codger I need someone to help me get through the mountain of kits I've still got to build! Creep, creep, crawl, crawl.
-
- LNER A4 4-6-2 'Streak'
- Posts: 4303
- Joined: Wed Oct 25, 2006 8:46 am
Re: West End Workbench
Well, crawling will get you.... these.
Last edited by jwealleans on Tue Dec 04, 2018 4:53 pm, edited 2 times in total.
- manna
- LNER A4 4-6-2 'Streak'
- Posts: 3862
- Joined: Sun May 24, 2009 12:56 am
- Location: All over Australia
Re: West End Workbench
G'day Gents
I'm on my knee's to..........but now I've got to get back up again
manna
I'm on my knee's to..........but now I've got to get back up again
manna
EDGWARE GN, Steam in the Suburbs.
- Dave
- LNER A4 4-6-2 'Streak'
- Posts: 1733
- Joined: Sat Nov 13, 2010 9:33 pm
- Location: Centre of the known universe York
Re: West End Workbench
Thanks JW looking forward to finished pics.
Sorry Scottiedog I'm in the same boat as you, too many kits and too little time, mind you it's a long time since I was called a so and so .
Sorry Scottiedog I'm in the same boat as you, too many kits and too little time, mind you it's a long time since I was called a so and so .
-
- NBR J36 0-6-0
- Posts: 122
- Joined: Sun Oct 12, 2008 8:56 pm
Re: West End Workbench
JW - superb, as usual. A true craftsman, indeed! Will be in touch shortly to arrange collection.
Dave - I will be doing a little bid of work on them i.e. lettering, weathering, etc. after which I will post photographs of the finished articles. I won't tell you what's next on the cards!
Dave - I will be doing a little bid of work on them i.e. lettering, weathering, etc. after which I will post photographs of the finished articles. I won't tell you what's next on the cards!