2750 (Tom's) Workbench-North Eastern Modelling 1938

This forum is for the discussion of railway modelling of the LNER and its constituent companies.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard

User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by Tom F »

52D wrote:Earl/Tom I was threatened with a lynching if I repainted my green D20 to black, although I do like them in black.
I think LNER black with single red lining is very attractive livery. Hornby's new D16 looks lovely from the photos I"ve seen....sadly North of York I can't have one.
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
earlswood nob
LNER A4 4-6-2 'Streak'
Posts: 1669
Joined: Tue Mar 09, 2010 9:23 am
Location: Surrey

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by earlswood nob »

Evenin' all
I haven't built my D20 yet, but it will have to be lined black.
A few years ago, I bought a D23 in green with a GS tender. I've replaced the tender with a Dave Alexander tender painted black, but I haven't yet had the heart to paint the loco black.
I don't like K3's in green, but do like 4-4-0's in green.
I've never seen a model of a D22, but it looks a simple conversion from a J21. I don't think they lasted until 1938, and they would be black as well.

Earlswood nob
Danby Wiske
GCR D11 4-4-0 'Improved Director'
Posts: 413
Joined: Fri Oct 19, 2012 12:09 am

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by Danby Wiske »

2750 wrote:sadly North of York I can't have one.
Maybe on excursions? I'm sure I've read somewhere about 'foreign' loco crews taking on board a pilot over NE metals, so perhaps some LNER engines would also have worked through from other regions?
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by Tom F »

Danby Wiske wrote:
2750 wrote:sadly North of York I can't have one.
Maybe on excursions? I'm sure I've read somewhere about 'foreign' loco crews taking on board a pilot over NE metals, so perhaps some LNER engines would also have worked through from other regions?
Tut tut Danby Wiske, I'm trying to save money....i have proof of B17s working north to Newcastle, not read anything about D16s....if someone has evidence...I'll have one! :D
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
earlswood nob
LNER A4 4-6-2 'Streak'
Posts: 1669
Joined: Tue Mar 09, 2010 9:23 am
Location: Surrey

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by earlswood nob »

Good morning all

The D16's had a small tender, so I don't think they went too far.
They could have worked the joint line to Doncaster.

Earlswood nob
jwealleans
LNER A4 4-6-2 'Streak'
Posts: 4303
Joined: Wed Oct 25, 2006 8:46 am

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by jwealleans »

D16s went as far as York from their very early days (GER) and the LNER sent some to Manchester as well.

I've never seen any pictures of one past York, though.
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by Tom F »

Afternoon all.

The J27 is now in black awaiting transfers. Quick question though, is the pressfix spacing of LNER correct for J classes?
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
markindurham
H&BR Q10 0-8-0
Posts: 189
Joined: Tue Mar 27, 2012 9:38 am

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by markindurham »

2750 wrote:...i have proof of B17s working north to Newcastle,
Hi Tom

That's very interesting. I don't suppose you know if they went via Durham or via the Leamside?
*he asked, hopefully* :D

Cheers
Mark
User avatar
ArthurK
GNSR D40 4-4-0
Posts: 241
Joined: Sat May 08, 2010 4:23 pm
Location: Lancashire

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by ArthurK »

markindurham wrote:
2750 wrote:...i have proof of B17s working north to Newcastle,
Hi Tom

That's very interesting. I don't suppose you know if they went via Durham or via the Leamside?
*he asked, hopefully* :D

Cheers
Mark
The only B17s that I saw in Newcastle were on running in turhs from Darlington. You were very lucky to be there when one did arrive, via the High Level bridge, into a bay platform (probably 6 or 7) at the East end of Central. I caused great excitement when this did happen which wasn't very often.

Of course they could only have arrived at Darlington by working north from York and beyond.

ArthurK
User avatar
52D
LNER A4 4-6-2 'Streak'
Posts: 3968
Joined: Sun Jun 03, 2007 3:50 pm
Location: Reallocated now between the Lickey and GWR
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by 52D »

ages ago I posted a pic of DERBY COUNTY masquerading as SUNDERLAND taking a footex to wembely in 1937 as the real SUNDERLAND was in the shops. The pic was taken at Newcastle Central. Will find and repost.
Hi interested in the area served by 52D. also researching colliery wagonways from same area.
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by Tom F »

I have two B17 photos of them, Up North. 2835 Milton, at Newcastle with a York train, 19/06/1937 (2385 is a Doncaster allocation) and 2846 'Gilwell Park' at Low Fell on a parcels, 1/09/1939 (2846 was a March allocation).

Both locos were overhauled at Gorton during this period, so running in turns can be ruled out.

Interesting stuff.
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
giner
LNER A4 4-6-2 'Streak'
Posts: 1558
Joined: Wed Feb 27, 2008 5:17 am
Location: Alberta - ex. Stevenage

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by giner »

52D wrote:ages ago I posted a pic of DERBY COUNTY masquerading as SUNDERLAND taking a footex to wembely in 1937 as the real SUNDERLAND was in the shops. The pic was taken at Newcastle Central. Will find and repost.
Indeed. I remember that photo well - the stuff of which legends are made. Definitely worth a re-viewing.
markindurham
H&BR Q10 0-8-0
Posts: 189
Joined: Tue Mar 27, 2012 9:38 am

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by markindurham »

Thanks for the replies, chaps. Yes, I can imagine you having to be lucky to see such things :)
User avatar
Tom F
LNER A3 4-6-2
Posts: 1270
Joined: Wed May 27, 2009 6:23 pm
Location: North of the Don.....South of the Tees
Contact:

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by Tom F »

A recent commission for somebody of this parish.

Bachmann J39 done to a typical working grubby standard.
_MG_7828.jpg
_MG_7826.jpg
Tom Foster
Modelling the North Eastern Area of the LNER - 1935-1939
User avatar
2002EarlMarischal
LNER A3 4-6-2
Posts: 1402
Joined: Thu Jul 09, 2009 11:18 pm
Location: Burbage

Re: 2750 (Tom's) Workbench-North Eastern Modelling 1938

Post by 2002EarlMarischal »

Totally looks the part Tom! :D
Post Reply