Page 1 of 1

Mousa Models

Posted: Sun Sep 06, 2020 4:36 pm
by billbedford
I've just put up a new website​​​​​​​, and the idea of this one is that it will only contain models that I can produce in a reasonable time.

There is a redirect from the original site, but it may give a 404 if you are expecting a particular page.

Re: Mousa Models

Posted: Sun Sep 06, 2020 9:18 pm
by Atlantic 3279
That's a coincidence Bill. I was looking at your "old" website a couple of days ago, finding that the page that once related to etched 6 wheeled carriages had disappeared. That left me wondering whether there's still any possibility, should anybody want them, of getting etched kits for MS&L / GCR 6 wheelers from you, and if so at what sort of price and how long it might take. Can you advise please?

Re: Mousa Models

Posted: Mon Sep 07, 2020 8:21 am
by billbedford
I've withdrawn all the old etches mainly because the etcher's delivery is around 4-6 weeks. Once their delivery comes back to what passes for normal I'll decide what to do with them.

I have great plans, but so little time.

Re: Mousa Models

Posted: Mon Sep 07, 2020 9:50 am
by Atlantic 3279
There's never enough time for all of my "good ideas" either. I suspect that's a near universal finding for those with active minds.

It might be nice if the possibility of MS&L / GCR 6 wheelers remained open, even if only a basic selection such as 2B8 full-third and a brake third were on offer.

Re: Mousa Models

Posted: Mon Sep 07, 2020 8:03 pm
by Richard i
I agree gcr 6 wheelers would be nice.
I must have a look at the new website.
Richard

Re: Mousa Models

Posted: Tue Sep 08, 2020 9:30 am
by davidwest
Will you still do doing the o4/7 and the once announced o4/8?

Re: Mousa Models

Posted: Tue Sep 08, 2020 9:42 am
by billbedford
All the variations of the O7 are on the new site. I started the drawing of the O8, but not got very far with it yet.

Re: Mousa Models

Posted: Wed Sep 09, 2020 7:42 pm
by Richard i
Do these variations include the 05 which I think you used to do. The one with the fatter boiler?
Richard

Re: Mousa Models

Posted: Thu Sep 10, 2020 9:42 am
by billbedford
They are variations on the O4/7 - three different smokeboxes, two domes and whether a vac injector is fitted.

The O4/5 is also available.

You cab check the page for yourself

Re: Mousa Models

Posted: Mon Feb 14, 2022 11:15 am
by billbedford
Just a quick heads up.

I've put up a new web page that allows downloading lists of most of the coach etches that were sold under the Bill Bedford Models label. Anything in these pages can be made to special order, at least initially.

Re: Mousa Models

Posted: Wed Feb 16, 2022 8:57 pm
by JonBates
billbedford wrote: Mon Feb 14, 2022 11:15 am Just a quick heads up.

I've put up a new web page that allows downloading lists of most of the coach etches that were sold under the Bill Bedford Models label. Anything in these pages can be made to special order, at least initially.
Hi Bill
Thank you for this.....some very interesting kits on the list.

Can I just check something please. Are these etches for sides, end, underframe etc? Or are they sides only?

Thanks
Jon

Re: Mousa Models

Posted: Thu Feb 17, 2022 10:52 am
by billbedford
JonBates wrote: Wed Feb 16, 2022 8:57 pm
Can I just check something please. Are these etches for sides, end, underframe etc? Or are they sides only?
One of the pdf's is titled 'Mousa Models Etched Sides'...

Re: Mousa Models

Posted: Thu Feb 17, 2022 8:45 pm
by JonBates
billbedford wrote: Thu Feb 17, 2022 10:52 am
JonBates wrote: Wed Feb 16, 2022 8:57 pm
Can I just check something please. Are these etches for sides, end, underframe etc? Or are they sides only?
One of the pdf's is titled 'Mousa Models Etched Sides'...

Ahhh....I hadn’t spotted the sides pdf.