carlislecitadel2's 3d printed Steel Containers
Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard
-
- LNER Thompson L1 2-6-4T
- Posts: 80
- Joined: Wed Dec 07, 2022 3:07 pm
Re: carlislecitadel2's 3d printed Steel Containers
I also printed out the parts for Norman Millier's 'reverse' Stanier brake van, scaled down from G1.
-
- LNER Thompson L1 2-6-4T
- Posts: 80
- Joined: Wed Dec 07, 2022 3:07 pm
Re: carlislecitadel2's 3d printed Steel Containers
I also printed out the parts for Norman Millier's 'reverse' Stanier brake van, scaled down from G1.
-
- LNER Thompson L1 2-6-4T
- Posts: 80
- Joined: Wed Dec 07, 2022 3:07 pm
Re: carlislecitadel2's 3d printed Steel Containers
Sorry about the poor quality of the picture but while to original was well under 2mb in size it would not let me upload it, even a 500kb it was till saying it was too large to add as an attachment.
-
- LNER Thompson L1 2-6-4T
- Posts: 80
- Joined: Wed Dec 07, 2022 3:07 pm
Re: carlislecitadel2's 3d printed Steel Containers
And I finally have nice model, with a very free running chassis, of Jonny Duffett's Thompson BG. It just needs cleaned up slightly. The A1 was able to print the chassis upside down without supports and the footboards still managed to come out OK. I fully expected to have to replace them from scratch. I will probably just fit dummy centre wheels in the meantime. It will happily do a full lap of the UMRC test track - about 80 feet.
-
- LNER Thompson L1 2-6-4T
- Posts: 80
- Joined: Wed Dec 07, 2022 3:07 pm
Re: carlislecitadel2's 3d printed Steel Containers
I just like to use this thread to inform, that the LNER-container Dia. 18 & 25 are now online for free download to print:
https://www.printables.com/model/999335 ... iner-1-148
There is also an PDF-file with decals for self-printing.
Thanks to Stephen for helping me to find sources and for his support.
Sascha
PS: I also uploaded decals for GWR-B4-diagram:
https://www.printables.com/model/636718 ... 4-containe
https://www.printables.com/model/999335 ... iner-1-148
There is also an PDF-file with decals for self-printing.
Thanks to Stephen for helping me to find sources and for his support.
Sascha
PS: I also uploaded decals for GWR-B4-diagram:
https://www.printables.com/model/636718 ... 4-containe
-
- LNER V2 2-6-2 'Green Arrow'
- Posts: 1097
- Joined: Mon Sep 19, 2011 12:24 am
Re: carlislecitadel2's 3d printed Steel Containers
good work,
but finding the decals is difficult, the links both go to the lorries, and there is not a link to the decals.
Paul
but finding the decals is difficult, the links both go to the lorries, and there is not a link to the decals.
Paul